AQUAGUARD 5000
FDA APPROVED EPOXY SYSTEM:

DESCRIPTION:

AquaGuard 5000 is a room temperature curing, two component, epoxy potting compound, adhesive, and coating system. AquaGuard Coatings meet the Food and Drug Administration (FDA) regulations permitting use in food contact applications. When properly cured, these products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections 175.105 and 175.300, CPC Load 16CFR 1303 – Soluble Heavy Metals ENTI Part 3 ASTMF 96307

FEATURES::
• Excellent adhesion
• Excellent chemical and corrosion resistance
• Meets FDA requirements

Subject: AquaGuard 5000 FDA Compliance (21CFR 175.300):

Extraction test conditions and results for AquaGuard 5000 applied and cured at 77°F and conducted per 21 CFR 175.300 requirements by SGS Testing Company is summarized below

*Coating for repeated use not to exceed 0.5 mg/in˛ nor that amount that would equal 0.005% of the water capacity of the container in mg divided by the food contact surface area in square inches

Test results allow use of AquaGuard 5000 as a lining in pools, spas, fountains and Marine Habitats. FDA regulations, test conditions, requirements, and acceptability of linings for specific food types and conditions of use under Code of Federal Regulations, Part 175, Section 300. Product compliance requires proper mixing, application, and cure prior to service per AquaGuard Product Information Bulletin recommended guidelines. Facility owners should review 21 CFR 175.300 to verify linings selected meet requirements needed for food types and conditions of use at their facility.